Will Luminair work with any DMX-512 compatible equipment?
Yes, Luminair works with all DMX512-A compliant equipment such as lighting fixtures, control consoles, media servers and more. Luminair transmits it's DMX control data over Wi-Fi, via Art-Net and/or sACN E1.31 protocols, to compatible interfaces or nodes on the same local network.
Luminair works directly with any Art-Net or sACN DMX-ethernet interface, some of the most common ones being DMXking eDMX, Enttec ODE, ELC DMX buddy, and Pathway Pathport. You don't need a master console or PC/Mac in this scenario, just connect the interface into any basic Wi-Fi router via ethernet, and run a DMX cable from the interface to your DMX lights.
If you'd like to use "Wireless DMX", W-DMX, or any other of the many other variants of wireless DMX with Luminair, you'll need to use one of the manufacturer's transmitters connected to the DMX output port of a Luminair-compatible Art-Net or sACN interface. This is because Wi-Fi is not directly compatible with these products, due to differences in radio technologies and protocols. These products are compatible with Luminair however, when one the manufacturer's transmitters is connected to a Luminair-compatible Art-Net or sACN interface.
Luminair works directly with any Art-Net or sACN DMX-ethernet interface, some of the most common ones being DMXking eDMX, Enttec ODE, ELC DMX buddy, and Pathway Pathport. You don't need a master console or PC/Mac in this scenario, just connect the interface into any basic Wi-Fi router via ethernet, and run a DMX cable from the interface to your DMX lights.
If you'd like to use "Wireless DMX", W-DMX, or any other of the many other variants of wireless DMX with Luminair, you'll need to use one of the manufacturer's transmitters connected to the DMX output port of a Luminair-compatible Art-Net or sACN interface. This is because Wi-Fi is not directly compatible with these products, due to differences in radio technologies and protocols. These products are compatible with Luminair however, when one the manufacturer's transmitters is connected to a Luminair-compatible Art-Net or sACN interface.